日本SMC氣緩沖式無桿氣缸 MY3B50-600L

日本SMC氣緩沖式無桿氣缸 MY3B50-600L

當一個外部導向的情況下，在導向容量的選擇確認應遵循的選擇過程
外部導向。
該MY3系列允許的允許范圍內置指南中直接加載應用程序。在這種情況下，有效負載
將根據驅動速度和氣缸的安裝方向而變化。請參閱下面的流量和
確認選擇。 （對于選定流程的更詳細的說明，請參考說明書。）

When an external guide is used, the selection confirmation of the guide capacity should follow the selection procedure
of the external guide.
The MY3 series allow direct load application within the allowable range for the built-in guide. The payload in this case
will vary depending on the driving speed and the mounting orientation of the cylinder. Please refer to the flow below and
confirm the selection. (For more detailed description of the selection flow, please refer to the instruction manual.

日本SMC氣緩沖式無桿氣缸 MY3B50-600L

設計*的活塞形狀能夠降低
的高度和長度，以及
作為實際安排常見的管道
通道，緩沖機構和定位機構。
這已經實現了大幅度
小型化和重量降低。

The uniquely designed piston
shape enables reduction of
the height and length as well
as practical arrangement of
the common piping
passages, cushion mechanism
and positioning mechanism.
This has achieved drastic
miniaturization and weight
reduction.