日本SMC先導式電磁閥出線方式

日本SMC先導式電磁閥出線方式

流體的動態粘度必須不過50
2 / s以下。
電樞的特殊結構，在通過
內置全波整流器類型給出在關的改進

響應由所吸收的表面提供間隙
當它被接通。
選擇直流規范。或交流規范。內置全波整流器
型時的動態粘度比水高或
當OFF反應被先。

日本SMC先導式電磁閥出線方式

The dynamic viscosity of the fluid must not exceed 50
mm2/s.
The special construction of the armature adopted in the
built-in full-wave rectifier type gives an improvement in OFF
response by providing clearance on the absorbed surface
when it is switched ON.
Select the DC spec. or AC spec. built-in full-wave rectifier
type when the dynamic viscosity is higher than water or
when the OFF response is prioritized.