日本SMC電磁閥

日本SMC電磁閥接線圖

容易地添加或減少
閥站的數量。
方便閥門維護
可安裝帶
一個螺絲。

使用卡帶式的閥門和歧管，使
很容易地增加或減少站的數量
在DIN導軌上。該插件類型包括兩個額外
閥站連接器。這種設計使得重裝
歧管擴張過程中不必要的。
 

日本SMC電磁閥接線圖

Easy to add or decrease
the number of valve stations.
Easy valve maintenance
Mountable with
one screw.
The use of cassette style valves and manifolds makes
it easy to increase or decrease the number of stations
on a DIN rail. The plug-in type includes two extra
valve station connectors. This design makes rewiring
unnecessary during manifold expansion.

注1）使用干燥的空氣，以防止冷凝在低溫條件下工作。
注2）耐振動：不發生故障，在45和2000赫茲之間有一個掃描測試。測試
在兩個激勵和去激勵狀態在軸向方向上執行
和在垂直于主閥和電樞。 （值在初始
期）
耐沖擊性：當它與在軸向一個下跌試驗機測試未發生故障
方向，并在合適的角度，以在這兩個主閥和電樞
通電和斷電狀態每一次為每個條件。
注意僅3）金屬密封型。
注4）快速響應，高壓型的

Note 1) Use dry air to prevent condensation when operating at low temperatures.
Note 2) Vibration resistance: No malfunction occurred in a one-sweep test between 45 and 2000 Hz. Test
was performed at both energized and de-energized states in the axial direction
and at the right angles to the main valve and armature. (Values at the initial
period)
Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial
direction and at the right angles to the main valve and armature in both
energized and deenergized states every once for each condition.
Note 3) Metal seal type only.
Note 4) Value for quick response, high pressure type

接線圖